Outdoor LED Display In The Summer When The Anti-moisture Should Be Dealt With

- Aug 18, 2017-

    Production of the production process of waterproof work in the production of LED display, the PCB board to do anti-corrosion treatment, such as the surface coating three anti-paint, power and power lines to use high-quality accessories. Selection of waterproof box, the sealing is better, the screen body must reach IP65.

    In the structure of the structure, according to the characteristics of the structure, can be considered with a hollow bubble tube structure, the compression of the permanent deformation rate is small, the pull of the structure of the anti- The length of the elongation and other properties of the sealing material; selected seal material, according to the characteristics of the sealing material, the design of the appropriate contact surface and contact force, so that the seal to the compact. The daily use of the process of attention, for the outdoor screen, need to be used frequently, because the working state of the display itself will produce some heat, can be some of the steam evaporated, greatly reduce the possibility of wet caused by short circuit. In the rainy season LED screen display for at least once a week, at least once a month to open the screen once, lit for more than 2 hours.

    LED display screen body water the correct remedies:

With the fastest speed with a fan or other tools, the water will be completely dry LED display screen. Will completely dry after drying the screen body aging, the specific steps are as follows: the brightness is adjusted to 10%, power aging 8-12 hours. The brightness is adjusted to 30%, power aging 12 hours. The brightness is adjusted to 60%, power aging 12-24 hours. The brightness is adjusted to 80%, power aging 12-24 hours. Will be bright to 100%, power aging 8-12 hours. Do not have the water into the LED screen screen into the air box, so it is easy to break the LED lights. Warehouse water, the air box is likely to water, the need for all air boxes to be exposed to prevent the container after the water volatile to the led display inside. Water LED display does not promptly deal with the screen may affect the stability of the emergency treatment, in the emergency treatment, the screen power may occur after the phenomenon of dead lights.